Importing IOU lab into Unetlab

  1. create simple IOU lab
    Image.png
  2. edit new lab
    Image.png

    Netmap: 1:0/0 2:0/0
    Image.png
    click Save

  3. configure both router
    Image.png

    R1#sh run
    hostname R1
    interface Ethernet0/0
     ip address 12.12.12.1 255.255.255.0
    R1#copy run unix:
    Destination filename [running-config]?
    R1#wr
    R2#sh run
    hostname R2
    interface Ethernet0/0
     ip address 12.12.12.2 255.255.255.0
    R2#copy run unix:
    Destination filename [running-config]?
    R2#wr
  4. copy all running config to database
    if you found error, then click each router and choose “Copy unix://running-config to database”
    sometime this happen because the router lost its config
    Image.png
  5. edit this lab again
    Image.png

    set both router initial config
    Image.png

  6. export the lab
    Image.png
    Select labs you want to export: tick labname
    Select initial config packs you want to export: tick labname
    click Export
  7. click Download
    Image.png
    rename the file name according to your lab name
  8. open Unetlab and import external lab
    Image.png
    Browse and click Import
    Image.png
  9. open the lab
    Image.png
  10. click More actions/Set all startup-cfg to exported
    click More actions/Wipe all nodes
    click More actions/Start all nodes

    Now all IOU config still intact in Unetlab
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s