FreePBX Server Installation

Download FreePBX iso from https://www.freepbx.org/downloads/
I am using Stable 64bit version.
I install on top of VirtualBox, even-though it will complain but still can run.
Tried on VMware Workstation, but stuck in the middle.
Haven’t tried in ESXi
Open VirtualBox and create vm with Linux/Other Linux (64bit), boot from ISO
13-Aug 13.56.23

13-Aug 13.57.46

13-Aug 13.58.45

13-Aug 13.59.07

13-Aug 13.59.49

13-Aug 14.00.12

13-Aug 14.00.38

go to https://10.0.10.83
L: admin
P:

-Disable unneeded Commercial Module
click Admin/Module Admin
click Module name that has License Commercial
click Disable
repeat with other Commercial module

-Upgrade module
click Admin/Module Admin
click Check On-line
expand Module that said Online Upgrade Available and click Download and Upgrade
click Process and click Confirm
click Apply Config
check in Reports/System Status

-Change Asterisk Manager Password
by default the password is amp111
go to Settings/Advanced Settings
go to Asterisk Manager/Asterisk Manager Password
change it

-Add some extension
click Applications/Extensions
choose Device: Generic CHAIN SIP Device
click Submit

User Extension
NOTE: if possible avoid extension that start with 1 to avoid conflict with
a. Emergency Number
b. Call US number

-to add SIP Trunk
DID Logic
click Connectivity/Trunks
click Add SIP (chan_sip) Trunk
Trunk Name: DIDLogic
Outbound CallerID: <12345678901>
CID Options: Allow Any CID
Maximum Channels: 2
Trunk Name: DIDLogic
PEER Details:
host=sip.sg.didlogic.net
user=12345
username=12345
fromuser=12345
authname=12345
secret=password
insecure=port,invite
type=friend
qualify=yes
disallow=all
allow=ulaw
Register String: 12345:password@sip.sg.didlogic.net

Hoiio
click Connectivity/Trunks
click Add SIP (chan_sip) Trunk
Trunk Name: Hoiio
Outbound CallerID: <12345678901>
CID Options: Allow Any CID
Maximum Channels: 2
Trunk Name: Hoiio
PEER Details:
host=sip1.hoiio.com
username=sip1234567
secret=password
type=peer
USER Context: 12345678901
USER Details:
host=sip1.hoiio.com
type=peer
context=from-trunk
qualify=yes
insecure=invite
Register String: sip1234567:password@sip1.hoiio.com

-To add Inbound Route
click Connectivity/Inbound Routes
click Add Incoming Route
DIDLogic
Description: DIDLogic
DID Number: 12345678901
Set Destination: Extensions 100 Operator

Hoiio
Description: Hoiio
Set Destination: Extensions 100 Operator

click All DIDs (toggle sort), make sure DIDLogic first then Hoiio

-To add Outbound Route
DIDLogic
Route Name: DIDLogic
Dial Patterns that will use this Route
+1XXXXXXXXXX
Trunk Sequence for Matched Routes: 0 DIDLogic

Hoiio
Route Name: Hoiio
Dial Patterns that will use this Route
+852XXXXXXXX
Trunk Sequence for Matched Routes: 0 Hoiio

-disable Allow SIP Guests
click Settings/Asterisk SIP Settings/Chan SIP
Allow SIP Guests: No

-To reset web admin password
login as root to FreePBX
open browser and go to https://10.0.10.83/admin
press Control+A to highlight long string on the bottom left of the page
copy that. for example the string is bvjp7l3emseqgo83bbp6dl2m23
# amportal a u bvjp7l3emseqgo83bbp6dl2m23
refresh https://10.0.10.83/admin
You will be automatically login to the web
reset admin password by clicking at Admin/Administrator/Admin
type new password
click Submit Changes

-To delete all incoming route
# source /etc/amportal.conf
# echo truncate incoming | mysql -u$AMPDBUSER -p$AMPDBPASS $AMPDBNAME

-to enable debug
# asterisk -vvvvvr
localhost*CLI> sip set debug on
-to disable debug
localhost*CLI> sip set debug off
-to debug certain peer only
localhost*CLI> sip show peers
it shows all your peers, then
localhost*CLI> sip set debug peer (peer_name)

# tcpdump -i eth0 -n -s 0 port 5060 -vvv | grep -B1 “INVITE sip”

-to check FreePBX version
# amportal a ma list | grep framework
framework 12.0.74 Enabled

PROBLEM

I have 2 SIP Trunks (DIDLogic and Hoiio)

PROBLEM:
1. inbound call number from DIDLogic shown Anonymous. I want the caller number
2. I can’t make inbound route call work in Hoiio if I set DID Number.
It said “the number you trying to call is not in service”
If I set DID Number empty and set order of Hoiio to last, then I can receive the call

SETTINGS:
https://nbctcp.wordpress.com/2015/08/17/freepbx-server-installation/

SW INFO:
-FreePBX 12.0.74 under VirtualBox

thanks

DEBUG:
This DIDLogic debug
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
— Executing [14159172008@from-trunk-sip-DIDLogic:1] Set(“SIP/DIDLogic-0000023a”, “GROUP()=OUT_2”) in new stack
— Executing [14159172008@from-trunk-sip-DIDLogic:2] Goto(“SIP/DIDLogic-0000023a”, “from-trunk,14159172008,1”) in new stack
— Goto (from-trunk,14159172008,1)
— Executing [14159172008@from-trunk:1] Set(“SIP/DIDLogic-0000023a”, “__FROM_DID=14159172008”) in new stack
— Executing [14159172008@from-trunk:2] Gosub(“SIP/DIDLogic-0000023a”, “sub-record-check,s,1(in,14159172008,dontcare)”) in new stack
— Executing [s@sub-record-check:1] GotoIf(“SIP/DIDLogic-0000023a”, “0?initialized”) in new stack
— Executing [s@sub-record-check:2] Set(“SIP/DIDLogic-0000023a”, “__REC_STATUS=INITIALIZED”) in new stack
— Executing [s@sub-record-check:3] Set(“SIP/DIDLogic-0000023a”, “NOW=1439764902”) in new stack
— Executing [s@sub-record-check:4] Set(“SIP/DIDLogic-0000023a”, “__DAY=17”) in new stack
— Executing [s@sub-record-check:5] Set(“SIP/DIDLogic-0000023a”, “__MONTH=08”) in new stack
— Executing [s@sub-record-check:6] Set(“SIP/DIDLogic-0000023a”, “__YEAR=2015”) in new stack
— Executing [s@sub-record-check:7] Set(“SIP/DIDLogic-0000023a”, “__TIMESTR=20150817-054142”) in new stack
— Executing [s@sub-record-check:8] Set(“SIP/DIDLogic-0000023a”, “__FROMEXTEN=unknown”) in new stack
— Executing [s@sub-record-check:9] Set(“SIP/DIDLogic-0000023a”, “__MON_FMT=wav”) in new stack
— Executing [s@sub-record-check:10] NoOp(“SIP/DIDLogic-0000023a”, “Recordings initialized”) in new stack
— Executing [s@sub-record-check:11] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(ARG3=dontcare)”) in new stack
— Executing [s@sub-record-check:12] Set(“SIP/DIDLogic-0000023a”, “REC_POLICY_MODE_SAVE=”) in new stack
— Executing [s@sub-record-check:13] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(REC_STATUS=NO)”) in new stack
— Executing [s@sub-record-check:14] GotoIf(“SIP/DIDLogic-0000023a”, “2?checkaction”) in new stack
— Goto (sub-record-check,s,17)
— Executing [s@sub-record-check:17] GotoIf(“SIP/DIDLogic-0000023a”, “1?sub-record-check,in,1”) in new stack
— Goto (sub-record-check,in,1)
— Executing [in@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023a”, “Inbound Recording Check to 14159172008”) in new stack
— Executing [in@sub-record-check:2] Set(“SIP/DIDLogic-0000023a”, “FROMEXTEN=unknown”) in new stack
— Executing [in@sub-record-check:3] ExecIf(“SIP/DIDLogic-0000023a”, “10?Set(FROMEXTEN=Restricted)”) in new stack
— Executing [in@sub-record-check:4] Gosub(“SIP/DIDLogic-0000023a”, “recordcheck,1(dontcare,in,14159172008)”) in new stack
— Executing [recordcheck@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023a”, “Starting recording check against dontcare”) in new stack
— Executing [recordcheck@sub-record-check:2] Goto(“SIP/DIDLogic-0000023a”, “dontcare”) in new stack
— Goto (sub-record-check,recordcheck,3)
— Executing [recordcheck@sub-record-check:3] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [in@sub-record-check:5] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [14159172008@from-trunk:3] Gosub(“SIP/DIDLogic-0000023a”, “app-blacklist-check,s,1()”) in new stack
— Executing [s@app-blacklist-check:1] GotoIf(“SIP/DIDLogic-0000023a”, “0?blacklisted”) in new stack
— Executing [s@app-blacklist-check:2] Set(“SIP/DIDLogic-0000023a”, “CALLED_BLACKLIST=1”) in new stack
— Executing [s@app-blacklist-check:3] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [14159172008@from-trunk:4] Set(“SIP/DIDLogic-0000023a”, “CDR(did)=14159172008”) in new stack
— Executing [14159172008@from-trunk:5] ExecIf(“SIP/DIDLogic-0000023a”, “0 ?Set(CALLERID(name)=Restricted)”) in new stack
— Executing [14159172008@from-trunk:6] Set(“SIP/DIDLogic-0000023a”, “CHANNEL(musicclass)=default”) in new stack
— Executing [14159172008@from-trunk:7] Set(“SIP/DIDLogic-0000023a”, “__MOHCLASS=default”) in new stack
[2015-08-17 05:41:42] WARNING[19766][C-00000247]: func_channel.c:538 func_channel_read: Unknown or unavailable item requested: ‘reversecharge’
— Executing [14159172008@from-trunk:8] GotoIf(“SIP/DIDLogic-0000023a”, “0?macro-hangupcall”) in new stack
— Executing [14159172008@from-trunk:9] Set(“SIP/DIDLogic-0000023a”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
— Executing [14159172008@from-trunk:10] Set(“SIP/DIDLogic-0000023a”, “CALLERPRES()=allowed_not_screened”) in new stack
— Executing [14159172008@from-trunk:11] Goto(“SIP/DIDLogic-0000023a”, “from-did-direct,100,1”) in new stack
— Goto (from-did-direct,100,1)
— Executing [100@from-did-direct:1] GotoIf(“SIP/DIDLogic-0000023a”, “1?ext-local,100,1”) in new stack
— Goto (ext-local,100,1)
— Executing [100@ext-local:1] Set(“SIP/DIDLogic-0000023a”, “__RINGTIMER=15”) in new stack
— Executing [100@ext-local:2] Macro(“SIP/DIDLogic-0000023a”, “exten-vm,novm,100,0,0,0”) in new stack
— Executing [s@macro-exten-vm:1] Macro(“SIP/DIDLogic-0000023a”, “user-callerid,”) in new stack
— Executing [s@macro-user-callerid:1] Set(“SIP/DIDLogic-0000023a”, “TOUCH_MONITOR=1439764902.570”) in new stack
— Executing [s@macro-user-callerid:2] Set(“SIP/DIDLogic-0000023a”, “AMPUSER=Restricted”) in new stack
— Executing [s@macro-user-callerid:3] GotoIf(“SIP/DIDLogic-0000023a”, “0?report”) in new stack
— Executing [s@macro-user-callerid:4] ExecIf(“SIP/DIDLogic-0000023a”, “1?Set(REALCALLERIDNUM=Restricted)”) in new stack
— Executing [s@macro-user-callerid:5] Set(“SIP/DIDLogic-0000023a”, “AMPUSER=”) in new stack
— Executing [s@macro-user-callerid:6] GotoIf(“SIP/DIDLogic-0000023a”, “0?limit”) in new stack
— Executing [s@macro-user-callerid:7] Set(“SIP/DIDLogic-0000023a”, “AMPUSERCIDNAME=”) in new stack
— Executing [s@macro-user-callerid:8] GotoIf(“SIP/DIDLogic-0000023a”, “1?report”) in new stack
— Goto (macro-user-callerid,s,16)
— Executing [s@macro-user-callerid:16] GotoIf(“SIP/DIDLogic-0000023a”, “0?continue”) in new stack
— Executing [s@macro-user-callerid:17] ExecIf(“SIP/DIDLogic-0000023a”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
— Executing [s@macro-user-callerid:18] Set(“SIP/DIDLogic-0000023a”, “__TTL=64”) in new stack
— Executing [s@macro-user-callerid:19] GotoIf(“SIP/DIDLogic-0000023a”, “1?continue”) in new stack
— Goto (macro-user-callerid,s,30)
— Executing [s@macro-user-callerid:30] Set(“SIP/DIDLogic-0000023a”, “CALLERID(number)=Restricted”) in new stack
— Executing [s@macro-user-callerid:31] Set(“SIP/DIDLogic-0000023a”, “CALLERID(name)=Anonymous”) in new stack
— Executing [s@macro-user-callerid:32] Set(“SIP/DIDLogic-0000023a”, “CDR(cnum)=Restricted”) in new stack
— Executing [s@macro-user-callerid:33] Set(“SIP/DIDLogic-0000023a”, “CDR(cnam)=Anonymous”) in new stack
— Executing [s@macro-user-callerid:34] Set(“SIP/DIDLogic-0000023a”, “CHANNEL(language)=en”) in new stack
— Executing [s@macro-exten-vm:2] Set(“SIP/DIDLogic-0000023a”, “RingGroupMethod=none”) in new stack
— Executing [s@macro-exten-vm:3] Set(“SIP/DIDLogic-0000023a”, “__EXTTOCALL=100”) in new stack
— Executing [s@macro-exten-vm:4] Set(“SIP/DIDLogic-0000023a”, “__PICKUPMARK=100”) in new stack
— Executing [s@macro-exten-vm:5] Set(“SIP/DIDLogic-0000023a”, “RT=”) in new stack
— Executing [s@macro-exten-vm:6] ExecIf(“SIP/DIDLogic-0000023a”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
— Executing [s@macro-exten-vm:7] ExecIf(“SIP/DIDLogic-0000023a”, “0?MacroExit()”) in new stack
— Executing [s@macro-exten-vm:8] Gosub(“SIP/DIDLogic-0000023a”, “sub-record-check,s,1(exten,100,dontcare)”) in new stack
— Executing [s@sub-record-check:1] GotoIf(“SIP/DIDLogic-0000023a”, “10?initialized”) in new stack
— Goto (sub-record-check,s,10)
— Executing [s@sub-record-check:10] NoOp(“SIP/DIDLogic-0000023a”, “Recordings initialized”) in new stack
— Executing [s@sub-record-check:11] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(ARG3=dontcare)”) in new stack
— Executing [s@sub-record-check:12] Set(“SIP/DIDLogic-0000023a”, “REC_POLICY_MODE_SAVE=”) in new stack
— Executing [s@sub-record-check:13] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(REC_STATUS=NO)”) in new stack
— Executing [s@sub-record-check:14] GotoIf(“SIP/DIDLogic-0000023a”, “5?checkaction”) in new stack
— Goto (sub-record-check,s,17)
— Executing [s@sub-record-check:17] GotoIf(“SIP/DIDLogic-0000023a”, “1?sub-record-check,exten,1”) in new stack
— Goto (sub-record-check,exten,1)
— Executing [exten@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023a”, “Exten Recording Check between Restricted and 100”) in new stack
— Executing [exten@sub-record-check:2] Set(“SIP/DIDLogic-0000023a”, “CALLTYPE=external”) in new stack
— Executing [exten@sub-record-check:3] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(CALLTYPE=)”) in new stack
— Executing [exten@sub-record-check:4] Set(“SIP/DIDLogic-0000023a”, “CALLEE=dontcare”) in new stack
— Executing [exten@sub-record-check:5] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(CALLEE=dontcare)”) in new stack
— Executing [exten@sub-record-check:6] GotoIf(“SIP/DIDLogic-0000023a”, “1?callee”) in new stack
— Goto (sub-record-check,exten,11)
— Executing [exten@sub-record-check:11] Gosub(“SIP/DIDLogic-0000023a”, “recordcheck,1(dontcare,external,100)”) in new stack
— Executing [recordcheck@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023a”, “Starting recording check against dontcare”) in new stack
— Executing [recordcheck@sub-record-check:2] Goto(“SIP/DIDLogic-0000023a”, “dontcare”) in new stack
— Goto (sub-record-check,recordcheck,3)
— Executing [recordcheck@sub-record-check:3] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [exten@sub-record-check:12] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [s@macro-exten-vm:9] GotoIf(“SIP/DIDLogic-0000023a”, “1?macrodial”) in new stack
— Goto (macro-exten-vm,s,15)
— Executing [s@macro-exten-vm:15] GosubIf(“SIP/DIDLogic-0000023a”, “0?clrheader,1()”) in new stack
— Executing [s@macro-exten-vm:16] Macro(“SIP/DIDLogic-0000023a”, “dial-one,,Ttr,100”) in new stack
— Executing [s@macro-dial-one:1] Set(“SIP/DIDLogic-0000023a”, “DEXTEN=100”) in new stack
— Executing [s@macro-dial-one:2] Set(“SIP/DIDLogic-0000023a”, “DIALSTATUS_CW=”) in new stack
— Executing [s@macro-dial-one:3] GosubIf(“SIP/DIDLogic-0000023a”, “0?screen,1()”) in new stack
— Executing [s@macro-dial-one:4] GosubIf(“SIP/DIDLogic-0000023a”, “0?cf,1()”) in new stack
— Executing [s@macro-dial-one:5] GotoIf(“SIP/DIDLogic-0000023a”, “1?skip1”) in new stack
— Goto (macro-dial-one,s,8)
— Executing [s@macro-dial-one:8] GotoIf(“SIP/DIDLogic-0000023a”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023a”, “0?continue”) in new stack
— Executing [s@macro-dial-one:10] Set(“SIP/DIDLogic-0000023a”, “EXTHASCW=ENABLED”) in new stack
— Executing [s@macro-dial-one:11] GotoIf(“SIP/DIDLogic-0000023a”, “0?next1:cwinusebusy”) in new stack
— Goto (macro-dial-one,s,23)
— Executing [s@macro-dial-one:23] GotoIf(“SIP/DIDLogic-0000023a”, “1?next3:continue”) in new stack
— Goto (macro-dial-one,s,24)
— Executing [s@macro-dial-one:24] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
— Executing [s@macro-dial-one:25] GotoIf(“SIP/DIDLogic-0000023a”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:26] GosubIf(“SIP/DIDLogic-0000023a”, “1?dstring,1():dlocal,1()”) in new stack
— Executing [dstring@macro-dial-one:1] Set(“SIP/DIDLogic-0000023a”, “DSTRING=”) in new stack
— Executing [dstring@macro-dial-one:2] Set(“SIP/DIDLogic-0000023a”, “DEVICES=100”) in new stack
— Executing [dstring@macro-dial-one:3] ExecIf(“SIP/DIDLogic-0000023a”, “0?Return()”) in new stack
— Executing [dstring@macro-dial-one:4] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(DEVICES=00)”) in new stack
— Executing [dstring@macro-dial-one:5] Set(“SIP/DIDLogic-0000023a”, “LOOPCNT=1”) in new stack
— Executing [dstring@macro-dial-one:6] Set(“SIP/DIDLogic-0000023a”, “ITER=1”) in new stack
— Executing [dstring@macro-dial-one:7] Set(“SIP/DIDLogic-0000023a”, “THISDIAL=SIP/100”) in new stack
— Executing [dstring@macro-dial-one:8] GosubIf(“SIP/DIDLogic-0000023a”, “1?zap2dahdi,1()”) in new stack
— Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/DIDLogic-0000023a”, “0?Return()”) in new stack
— Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/DIDLogic-0000023a”, “NEWDIAL=”) in new stack
— Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/DIDLogic-0000023a”, “LOOPCNT2=1”) in new stack
— Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/DIDLogic-0000023a”, “ITER2=1”) in new stack
— Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/DIDLogic-0000023a”, “THISPART2=SIP/100”) in new stack
— Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(THISPART2=DAHDI/100)”) in new stack
— Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/DIDLogic-0000023a”, “NEWDIAL=SIP/100&”) in new stack
— Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/DIDLogic-0000023a”, “ITER2=2”) in new stack
— Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023a”, “0?begin2”) in new stack
— Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/DIDLogic-0000023a”, “THISDIAL=SIP/100”) in new stack
— Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [dstring@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023a”, “1?doset”) in new stack
— Goto (macro-dial-one,dstring,13)
— Executing [dstring@macro-dial-one:13] Set(“SIP/DIDLogic-0000023a”, “DSTRING=SIP/100&”) in new stack
— Executing [dstring@macro-dial-one:14] Set(“SIP/DIDLogic-0000023a”, “ITER=2”) in new stack
— Executing [dstring@macro-dial-one:15] GotoIf(“SIP/DIDLogic-0000023a”, “0?begin”) in new stack
— Executing [dstring@macro-dial-one:16] ExecIf(“SIP/DIDLogic-0000023a”, “0?Return()”) in new stack
— Executing [dstring@macro-dial-one:17] Set(“SIP/DIDLogic-0000023a”, “DSTRING=SIP/100”) in new stack
— Executing [dstring@macro-dial-one:18] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [s@macro-dial-one:27] GotoIf(“SIP/DIDLogic-0000023a”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:28] GotoIf(“SIP/DIDLogic-0000023a”, “0?skiptrace”) in new stack
— Executing [s@macro-dial-one:29] GosubIf(“SIP/DIDLogic-0000023a”, “0?ctset,1():ctclear,1()”) in new stack
— Executing [ctclear@macro-dial-one:1] NoOp(“SIP/DIDLogic-0000023a”, “Deleting: CALLTRACE/100 85230794461”) in new stack
— Executing [ctclear@macro-dial-one:2] Return(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [s@macro-dial-one:30] Set(“SIP/DIDLogic-0000023a”, “D_OPTIONS=Ttr”) in new stack
— Executing [s@macro-dial-one:31] ExecIf(“SIP/DIDLogic-0000023a”, “0?SIPAddHeader(Alert-Info: )”) in new stack
— Executing [s@macro-dial-one:32] ExecIf(“SIP/DIDLogic-0000023a”, “0?SIPAddHeader()”) in new stack
— Executing [s@macro-dial-one:33] ExecIf(“SIP/DIDLogic-0000023a”, “1?Set(CHANNEL(musicclass)=default)”) in new stack
— Executing [s@macro-dial-one:34] GosubIf(“SIP/DIDLogic-0000023a”, “0?qwait,1()”) in new stack
— Executing [s@macro-dial-one:35] Set(“SIP/DIDLogic-0000023a”, “__CWIGNORE=”) in new stack
— Executing [s@macro-dial-one:36] Set(“SIP/DIDLogic-0000023a”, “__KEEPCID=TRUE”) in new stack
— Executing [s@macro-dial-one:37] GotoIf(“SIP/DIDLogic-0000023a”, “0?usegoto,1”) in new stack
— Executing [s@macro-dial-one:38] GotoIf(“SIP/DIDLogic-0000023a”, “1?godial”) in new stack
— Goto (macro-dial-one,s,43)
— Executing [s@macro-dial-one:43] Macro(“SIP/DIDLogic-0000023a”, “dialout-one-predial-hook,”) in new stack
— Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/DIDLogic-0000023a”, “”) in new stack
— Executing [s@macro-dial-one:44] Dial(“SIP/DIDLogic-0000023a”, “SIP/100,,Ttr”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
— Called SIP/100
— SIP/100-0000023b is ringing
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
— Executing [9007972592195995@from-sip-external:1] NoOp(“SIP/139.0.190.24-0000023c”, “Received incoming SIP connection from unknown peer to 9007972592195995”) in new stack
— Executing [9007972592195995@from-sip-external:2] Set(“SIP/139.0.190.24-0000023c”, “DID=9007972592195995”) in new stack
— Executing [9007972592195995@from-sip-external:3] Goto(“SIP/139.0.190.24-0000023c”, “s,1”) in new stack
— Goto (from-sip-external,s,1)
— Executing [s@from-sip-external:1] GotoIf(“SIP/139.0.190.24-0000023c”, “0?checklang:noanonymous”) in new stack
— Goto (from-sip-external,s,5)
— Executing [s@from-sip-external:5] Set(“SIP/139.0.190.24-0000023c”, “TIMEOUT(absolute)=15”) in new stack
— Channel will hangup at 2015-08-17 05:42:01.450 WIB.
— Executing [s@from-sip-external:6] Log(“SIP/139.0.190.24-0000023c”, “WARNING,”Rejecting unknown SIP connection from 142.54.189.154″”) in new stack
[2015-08-17 05:41:46] WARNING[19768][C-00000248]: Ext. s:6 @ from-sip-external: “Rejecting unknown SIP connection from 142.54.189.154”
— Executing [s@from-sip-external:7] Answer(“SIP/139.0.190.24-0000023c”, “”) in new stack
— Executing [s@from-sip-external:8] Wait(“SIP/139.0.190.24-0000023c”, “2”) in new stack
== Spawn extension (from-sip-external, s, 8) exited non-zero on ‘SIP/139.0.190.24-0000023c’
— Executing [h@from-sip-external:1] Hangup(“SIP/139.0.190.24-0000023c”, “”) in new stack
== Spawn extension (from-sip-external, h, 1) exited non-zero on ‘SIP/139.0.190.24-0000023c’
== Spawn extension (macro-dial-one, s, 44) exited non-zero on ‘SIP/DIDLogic-0000023a’ in macro ‘dial-one’
== Spawn extension (macro-exten-vm, s, 16) exited non-zero on ‘SIP/DIDLogic-0000023a’ in macro ‘exten-vm’
== Spawn extension (ext-local, 100, 2) exited non-zero on ‘SIP/DIDLogic-0000023a’
— Executing [h@ext-local:1] Macro(“SIP/DIDLogic-0000023a”, “hangupcall,”) in new stack
— Executing [s@macro-hangupcall:1] ExecIf(“SIP/DIDLogic-0000023a”, “0?Set(CDR(recordingfile)=.wav)”) in new stack
— Executing [s@macro-hangupcall:2] GotoIf(“SIP/DIDLogic-0000023a”, “1?theend”) in new stack
— Goto (macro-hangupcall,s,4)
— Executing [s@macro-hangupcall:4] Hangup(“SIP/DIDLogic-0000023a”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/DIDLogic-0000023a’ in macro ‘hangupcall’
== Spawn extension (ext-local, h, 1) exited non-zero on ‘SIP/DIDLogic-0000023a’

CLI> sip set debug on
Reliably Transmitting (NAT) to 54.251.255.196:5060:
OPTIONS sip:sip1.hoiio.com SIP/2.0
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK30646acc;rport
Max-Forwards: 70
From: “Unknown” <sip:Unknown@10.0.10.83>;tag=as12a0e2d8
To: <sip:sip1.hoiio.com>
Contact: <sip:Unknown@10.0.10.83:5060>
Call-ID: 03f4761e75d24ca71a7f73f969ba7084@10.0.10.83:5060
CSeq: 102 OPTIONS
User-Agent: FPBX-12.0.74(11.19.0)
Date: Sun, 16 Aug 2015 22:43:18 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Content-Length: 0

<— SIP read from UDP:54.251.255.196:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK30646acc;rport=5060;received=139.0.190.24
From: “Unknown” <sip:Unknown@10.0.10.83>;tag=as12a0e2d8
To: <sip:sip1.hoiio.com>;tag=868db4f6cffb55076ecda8456d16c298.c14d
Call-ID: 03f4761e75d24ca71a7f73f969ba7084@10.0.10.83:5060
CSeq: 102 OPTIONS
Server: kamailio (4.2.1 (x86_64/linux))
Content-Length: 0

<————->
— (8 headers 0 lines) —
Really destroying SIP dialog ’03f4761e75d24ca71a7f73f969ba7084@10.0.10.83:5060′ Method: OPTIONS
Reliably Transmitting (NAT) to 192.170.159.194:5060:
OPTIONS sip:sip.sg.didlogic.net SIP/2.0
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK67141686;rport
Max-Forwards: 70
From: “Unknown” <sip:08843@10.0.10.83>;tag=as67b0ecd0
To: <sip:sip.sg.didlogic.net>
Contact: <sip:08843@10.0.10.83:5060>
Call-ID: 2a55dd5805aeac2136b1db4661381ef5@10.0.10.83:5060
CSeq: 102 OPTIONS
User-Agent: FPBX-12.0.74(11.19.0)
Date: Sun, 16 Aug 2015 22:43:18 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Content-Length: 0

<— SIP read from UDP:192.170.159.194:5060 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK67141686;rport=5060;received=139.0.190.24
From: “Unknown” <sip:08843@10.0.10.83>;tag=as67b0ecd0
To: <sip:sip.sg.didlogic.net>;tag=b27e1a1d33761e85846fc98f5f3a7e58.402f
Call-ID: 2a55dd5805aeac2136b1db4661381ef5@10.0.10.83:5060
CSeq: 102 OPTIONS
Content-Length: 0

<————->
— (7 headers 0 lines) —
Really destroying SIP dialog ‘2a55dd5805aeac2136b1db4661381ef5@10.0.10.83:5060’ Method: OPTIONS

<— SIP read from UDP:192.170.159.194:5060 —>
INVITE sip:14159172008@10.0.10.83:5060 SIP/2.0
Record-Route: <sip:192.170.159.194;lr=on;ftag=as5b94fb55;vst=AAAAAAEMCQEKcQUCBx4JeQkeHwIbHwEdCzM-;nat=yes>
Record-Route: <sip:207.198.125.133;lr=on;ftag=as5b94fb55;vsf=AAAAABMLHBoLBAwBFiQhXF9ZV1xWTV0fW1tYUF9aZDo1MDgw>
Via: SIP/2.0/UDP 192.170.159.194;branch=z9hG4bKc027.dc99fb14642b37584c92ad7c60656da4.0
Via: SIP/2.0/UDP 207.198.125.133;rport=5060;branch=z9hG4bKc027.8eaafe73ac00e89545c82ae87dc565a8.0
Via: SIP/2.0/UDP 192.170.152.170:5080;received=192.170.152.170;branch=z9hG4bK4d59a910;rport=5080
Max-Forwards: 68
From: Anonymous <sip:Restricted@207.198.125.133>;tag=as5b94fb55
To: 14159172008 <sip:14159172008@10.0.10.83>
Contact: <sip:Anonymous@192.170.152.170:5080>
Call-ID: 46608fc27bf8d5d32be1e8d21b82b619@192.170.152.170
CSeq: 102 INVITE
Date: Sun, 16 Aug 2015 22:43:15 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces, timer
X-CID: 1158153571_16032226@207.223.70.243
X-CallId:
Content-Type: application/sdp
Content-Length: 357
User-Agent: DIDLogic SBC

v=0
o=didlogic 1675557745 1675557745 IN IP4 192.170.152.170
s=DID Logic MGW
c=IN IP4 192.170.152.170
t=0 0
m=audio 14316 RTP/AVP 8 0 9 18 3 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:9 G722/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:3 GSM/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv
<————->
— (20 headers 16 lines) —
Sending to 192.170.159.194:5060 (NAT)
Sending to 192.170.159.194:5060 (NAT)
Using INVITE request as basis request – 46608fc27bf8d5d32be1e8d21b82b619@192.170.152.170
Found peer ‘DIDLogic’ for ‘Restricted’ from 192.170.159.194:5060
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
Found RTP audio format 8
Found RTP audio format 0
Found RTP audio format 9
Found RTP audio format 18
Found RTP audio format 3
Found RTP audio format 101
Found audio description format PCMA for ID 8
Found audio description format PCMU for ID 0
Found audio description format G722 for ID 9
Found audio description format G729 for ID 18
Found audio description format GSM for ID 3
Found audio description format telephone-event for ID 101
Capabilities: us – (ulaw), peer – audio=(gsm|ulaw|alaw|g729|g722)/video=(nothing)/text=(nothing), combined – (ulaw)
Non-codec capabilities (dtmf): us – 0x1 (telephone-event|), peer – 0x1 (telephone-event|), combined – 0x1 (telephone-event|)
Peer audio RTP is at port 192.170.152.170:14316
Looking for 14159172008 in from-trunk-sip-DIDLogic (domain 10.0.10.83)
list_route: hop: <sip:192.170.159.194;lr=on;ftag=as5b94fb55;vst=AAAAAAEMCQEKcQUCBx4JeQkeHwIbHwEdCzM-;nat=yes>
list_route: hop: <sip:207.198.125.133;lr=on;ftag=as5b94fb55;vsf=AAAAABMLHBoLBAwBFiQhXF9ZV1xWTV0fW1tYUF9aZDo1MDgw>

<— Transmitting (NAT) to 192.170.159.194:5060 —>
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.170.159.194;branch=z9hG4bKc027.dc99fb14642b37584c92ad7c60656da4.0;received=192.170.159.194;rport=5060
Via: SIP/2.0/UDP 207.198.125.133;rport=5060;branch=z9hG4bKc027.8eaafe73ac00e89545c82ae87dc565a8.0
Via: SIP/2.0/UDP 192.170.152.170:5080;received=192.170.152.170;branch=z9hG4bK4d59a910;rport=5080
Record-Route: <sip:192.170.159.194;lr=on;ftag=as5b94fb55;vst=AAAAAAEMCQEKcQUCBx4JeQkeHwIbHwEdCzM-;nat=yes>
Record-Route: <sip:207.198.125.133;lr=on;ftag=as5b94fb55;vsf=AAAAABMLHBoLBAwBFiQhXF9ZV1xWTV0fW1tYUF9aZDo1MDgw>
From: Anonymous <sip:Restricted@207.198.125.133>;tag=as5b94fb55
To: 14159172008 <sip:14159172008@10.0.10.83>
Call-ID: 46608fc27bf8d5d32be1e8d21b82b619@192.170.152.170
CSeq: 102 INVITE
Server: FPBX-12.0.74(11.19.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Session-Expires: 1800;refresher=uas
Contact: <sip:14159172008@10.0.10.83:5060>
Content-Length: 0
<————>
— Executing [14159172008@from-trunk-sip-DIDLogic:1] Set(“SIP/DIDLogic-0000023f”, “GROUP()=OUT_2”) in new stack
— Executing [14159172008@from-trunk-sip-DIDLogic:2] Goto(“SIP/DIDLogic-0000023f”, “from-trunk,14159172008,1”) in new stack
— Goto (from-trunk,14159172008,1)
— Executing [14159172008@from-trunk:1] Set(“SIP/DIDLogic-0000023f”, “__FROM_DID=14159172008”) in new stack
— Executing [14159172008@from-trunk:2] Gosub(“SIP/DIDLogic-0000023f”, “sub-record-check,s,1(in,14159172008,dontcare)”) in new stack
— Executing [s@sub-record-check:1] GotoIf(“SIP/DIDLogic-0000023f”, “0?initialized”) in new stack
— Executing [s@sub-record-check:2] Set(“SIP/DIDLogic-0000023f”, “__REC_STATUS=INITIALIZED”) in new stack
— Executing [s@sub-record-check:3] Set(“SIP/DIDLogic-0000023f”, “NOW=1439764998”) in new stack
— Executing [s@sub-record-check:4] Set(“SIP/DIDLogic-0000023f”, “__DAY=17”) in new stack
— Executing [s@sub-record-check:5] Set(“SIP/DIDLogic-0000023f”, “__MONTH=08”) in new stack
— Executing [s@sub-record-check:6] Set(“SIP/DIDLogic-0000023f”, “__YEAR=2015”) in new stack
— Executing [s@sub-record-check:7] Set(“SIP/DIDLogic-0000023f”, “__TIMESTR=20150817-054318”) in new stack
— Executing [s@sub-record-check:8] Set(“SIP/DIDLogic-0000023f”, “__FROMEXTEN=unknown”) in new stack
— Executing [s@sub-record-check:9] Set(“SIP/DIDLogic-0000023f”, “__MON_FMT=wav”) in new stack
— Executing [s@sub-record-check:10] NoOp(“SIP/DIDLogic-0000023f”, “Recordings initialized”) in new stack
— Executing [s@sub-record-check:11] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(ARG3=dontcare)”) in new stack
— Executing [s@sub-record-check:12] Set(“SIP/DIDLogic-0000023f”, “REC_POLICY_MODE_SAVE=”) in new stack
— Executing [s@sub-record-check:13] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(REC_STATUS=NO)”) in new stack
— Executing [s@sub-record-check:14] GotoIf(“SIP/DIDLogic-0000023f”, “2?checkaction”) in new stack
— Goto (sub-record-check,s,17)
— Executing [s@sub-record-check:17] GotoIf(“SIP/DIDLogic-0000023f”, “1?sub-record-check,in,1”) in new stack
— Goto (sub-record-check,in,1)
— Executing [in@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023f”, “Inbound Recording Check to 14159172008”) in new stack
— Executing [in@sub-record-check:2] Set(“SIP/DIDLogic-0000023f”, “FROMEXTEN=unknown”) in new stack
— Executing [in@sub-record-check:3] ExecIf(“SIP/DIDLogic-0000023f”, “10?Set(FROMEXTEN=Restricted)”) in new stack
— Executing [in@sub-record-check:4] Gosub(“SIP/DIDLogic-0000023f”, “recordcheck,1(dontcare,in,14159172008)”) in new stack
— Executing [recordcheck@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023f”, “Starting recording check against dontcare”) in new stack
— Executing [recordcheck@sub-record-check:2] Goto(“SIP/DIDLogic-0000023f”, “dontcare”) in new stack
— Goto (sub-record-check,recordcheck,3)
— Executing [recordcheck@sub-record-check:3] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [in@sub-record-check:5] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [14159172008@from-trunk:3] Gosub(“SIP/DIDLogic-0000023f”, “app-blacklist-check,s,1()”) in new stack
— Executing [s@app-blacklist-check:1] GotoIf(“SIP/DIDLogic-0000023f”, “0?blacklisted”) in new stack
— Executing [s@app-blacklist-check:2] Set(“SIP/DIDLogic-0000023f”, “CALLED_BLACKLIST=1”) in new stack
— Executing [s@app-blacklist-check:3] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [14159172008@from-trunk:4] Set(“SIP/DIDLogic-0000023f”, “CDR(did)=14159172008”) in new stack
— Executing [14159172008@from-trunk:5] ExecIf(“SIP/DIDLogic-0000023f”, “0 ?Set(CALLERID(name)=Restricted)”) in new stack
— Executing [14159172008@from-trunk:6] Set(“SIP/DIDLogic-0000023f”, “CHANNEL(musicclass)=default”) in new stack
— Executing [14159172008@from-trunk:7] Set(“SIP/DIDLogic-0000023f”, “__MOHCLASS=default”) in new stack
[2015-08-17 05:43:18] WARNING[19828][C-0000024b]: func_channel.c:538 func_channel_read: Unknown or unavailable item requested: ‘reversecharge’
— Executing [14159172008@from-trunk:8] GotoIf(“SIP/DIDLogic-0000023f”, “0?macro-hangupcall”) in new stack
— Executing [14159172008@from-trunk:9] Set(“SIP/DIDLogic-0000023f”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
— Executing [14159172008@from-trunk:10] Set(“SIP/DIDLogic-0000023f”, “CALLERPRES()=allowed_not_screened”) in new stack
— Executing [14159172008@from-trunk:11] Goto(“SIP/DIDLogic-0000023f”, “from-did-direct,100,1”) in new stack
— Goto (from-did-direct,100,1)
— Executing [100@from-did-direct:1] GotoIf(“SIP/DIDLogic-0000023f”, “1?ext-local,100,1”) in new stack
— Goto (ext-local,100,1)
— Executing [100@ext-local:1] Set(“SIP/DIDLogic-0000023f”, “__RINGTIMER=15”) in new stack
— Executing [100@ext-local:2] Macro(“SIP/DIDLogic-0000023f”, “exten-vm,novm,100,0,0,0”) in new stack
— Executing [s@macro-exten-vm:1] Macro(“SIP/DIDLogic-0000023f”, “user-callerid,”) in new stack
— Executing [s@macro-user-callerid:1] Set(“SIP/DIDLogic-0000023f”, “TOUCH_MONITOR=1439764998.575”) in new stack
— Executing [s@macro-user-callerid:2] Set(“SIP/DIDLogic-0000023f”, “AMPUSER=Restricted”) in new stack
— Executing [s@macro-user-callerid:3] GotoIf(“SIP/DIDLogic-0000023f”, “0?report”) in new stack
— Executing [s@macro-user-callerid:4] ExecIf(“SIP/DIDLogic-0000023f”, “1?Set(REALCALLERIDNUM=Restricted)”) in new stack
— Executing [s@macro-user-callerid:5] Set(“SIP/DIDLogic-0000023f”, “AMPUSER=”) in new stack
— Executing [s@macro-user-callerid:6] GotoIf(“SIP/DIDLogic-0000023f”, “0?limit”) in new stack
— Executing [s@macro-user-callerid:7] Set(“SIP/DIDLogic-0000023f”, “AMPUSERCIDNAME=”) in new stack
— Executing [s@macro-user-callerid:8] GotoIf(“SIP/DIDLogic-0000023f”, “1?report”) in new stack
— Goto (macro-user-callerid,s,16)
— Executing [s@macro-user-callerid:16] GotoIf(“SIP/DIDLogic-0000023f”, “0?continue”) in new stack
— Executing [s@macro-user-callerid:17] ExecIf(“SIP/DIDLogic-0000023f”, “1?Set(__CALLEE_ACCOUNCODE=)”) in new stack
— Executing [s@macro-user-callerid:18] Set(“SIP/DIDLogic-0000023f”, “__TTL=64”) in new stack
— Executing [s@macro-user-callerid:19] GotoIf(“SIP/DIDLogic-0000023f”, “1?continue”) in new stack
— Goto (macro-user-callerid,s,30)
— Executing [s@macro-user-callerid:30] Set(“SIP/DIDLogic-0000023f”, “CALLERID(number)=Restricted”) in new stack
— Executing [s@macro-user-callerid:31] Set(“SIP/DIDLogic-0000023f”, “CALLERID(name)=Anonymous”) in new stack
— Executing [s@macro-user-callerid:32] Set(“SIP/DIDLogic-0000023f”, “CDR(cnum)=Restricted”) in new stack
— Executing [s@macro-user-callerid:33] Set(“SIP/DIDLogic-0000023f”, “CDR(cnam)=Anonymous”) in new stack
— Executing [s@macro-user-callerid:34] Set(“SIP/DIDLogic-0000023f”, “CHANNEL(language)=en”) in new stack
— Executing [s@macro-exten-vm:2] Set(“SIP/DIDLogic-0000023f”, “RingGroupMethod=none”) in new stack
— Executing [s@macro-exten-vm:3] Set(“SIP/DIDLogic-0000023f”, “__EXTTOCALL=100”) in new stack
— Executing [s@macro-exten-vm:4] Set(“SIP/DIDLogic-0000023f”, “__PICKUPMARK=100”) in new stack
— Executing [s@macro-exten-vm:5] Set(“SIP/DIDLogic-0000023f”, “RT=”) in new stack
— Executing [s@macro-exten-vm:6] ExecIf(“SIP/DIDLogic-0000023f”, “0?Macro(vm,novm,DIRECTDIAL,)”) in new stack
— Executing [s@macro-exten-vm:7] ExecIf(“SIP/DIDLogic-0000023f”, “0?MacroExit()”) in new stack
— Executing [s@macro-exten-vm:8] Gosub(“SIP/DIDLogic-0000023f”, “sub-record-check,s,1(exten,100,dontcare)”) in new stack
— Executing [s@sub-record-check:1] GotoIf(“SIP/DIDLogic-0000023f”, “10?initialized”) in new stack
— Goto (sub-record-check,s,10)
— Executing [s@sub-record-check:10] NoOp(“SIP/DIDLogic-0000023f”, “Recordings initialized”) in new stack
— Executing [s@sub-record-check:11] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(ARG3=dontcare)”) in new stack
— Executing [s@sub-record-check:12] Set(“SIP/DIDLogic-0000023f”, “REC_POLICY_MODE_SAVE=”) in new stack
— Executing [s@sub-record-check:13] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(REC_STATUS=NO)”) in new stack
— Executing [s@sub-record-check:14] GotoIf(“SIP/DIDLogic-0000023f”, “5?checkaction”) in new stack
— Goto (sub-record-check,s,17)
— Executing [s@sub-record-check:17] GotoIf(“SIP/DIDLogic-0000023f”, “1?sub-record-check,exten,1”) in new stack
— Goto (sub-record-check,exten,1)
— Executing [exten@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023f”, “Exten Recording Check between Restricted and 100”) in new stack
— Executing [exten@sub-record-check:2] Set(“SIP/DIDLogic-0000023f”, “CALLTYPE=external”) in new stack
— Executing [exten@sub-record-check:3] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(CALLTYPE=)”) in new stack
— Executing [exten@sub-record-check:4] Set(“SIP/DIDLogic-0000023f”, “CALLEE=dontcare”) in new stack
— Executing [exten@sub-record-check:5] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(CALLEE=dontcare)”) in new stack
— Executing [exten@sub-record-check:6] GotoIf(“SIP/DIDLogic-0000023f”, “1?callee”) in new stack
— Goto (sub-record-check,exten,11)
— Executing [exten@sub-record-check:11] Gosub(“SIP/DIDLogic-0000023f”, “recordcheck,1(dontcare,external,100)”) in new stack
— Executing [recordcheck@sub-record-check:1] NoOp(“SIP/DIDLogic-0000023f”, “Starting recording check against dontcare”) in new stack
— Executing [recordcheck@sub-record-check:2] Goto(“SIP/DIDLogic-0000023f”, “dontcare”) in new stack
— Goto (sub-record-check,recordcheck,3)
— Executing [recordcheck@sub-record-check:3] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [exten@sub-record-check:12] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [s@macro-exten-vm:9] GotoIf(“SIP/DIDLogic-0000023f”, “1?macrodial”) in new stack
— Goto (macro-exten-vm,s,15)
— Executing [s@macro-exten-vm:15] GosubIf(“SIP/DIDLogic-0000023f”, “0?clrheader,1()”) in new stack
— Executing [s@macro-exten-vm:16] Macro(“SIP/DIDLogic-0000023f”, “dial-one,,Ttr,100”) in new stack
— Executing [s@macro-dial-one:1] Set(“SIP/DIDLogic-0000023f”, “DEXTEN=100”) in new stack
— Executing [s@macro-dial-one:2] Set(“SIP/DIDLogic-0000023f”, “DIALSTATUS_CW=”) in new stack
— Executing [s@macro-dial-one:3] GosubIf(“SIP/DIDLogic-0000023f”, “0?screen,1()”) in new stack
— Executing [s@macro-dial-one:4] GosubIf(“SIP/DIDLogic-0000023f”, “0?cf,1()”) in new stack
— Executing [s@macro-dial-one:5] GotoIf(“SIP/DIDLogic-0000023f”, “1?skip1”) in new stack
— Goto (macro-dial-one,s,8)
— Executing [s@macro-dial-one:8] GotoIf(“SIP/DIDLogic-0000023f”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023f”, “0?continue”) in new stack
— Executing [s@macro-dial-one:10] Set(“SIP/DIDLogic-0000023f”, “EXTHASCW=ENABLED”) in new stack
— Executing [s@macro-dial-one:11] GotoIf(“SIP/DIDLogic-0000023f”, “0?next1:cwinusebusy”) in new stack
— Goto (macro-dial-one,s,23)
— Executing [s@macro-dial-one:23] GotoIf(“SIP/DIDLogic-0000023f”, “1?next3:continue”) in new stack
— Goto (macro-dial-one,s,24)
— Executing [s@macro-dial-one:24] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(DIALSTATUS_CW=BUSY)”) in new stack
— Executing [s@macro-dial-one:25] GotoIf(“SIP/DIDLogic-0000023f”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:26] GosubIf(“SIP/DIDLogic-0000023f”, “1?dstring,1():dlocal,1()”) in new stack
— Executing [dstring@macro-dial-one:1] Set(“SIP/DIDLogic-0000023f”, “DSTRING=”) in new stack
— Executing [dstring@macro-dial-one:2] Set(“SIP/DIDLogic-0000023f”, “DEVICES=100”) in new stack
— Executing [dstring@macro-dial-one:3] ExecIf(“SIP/DIDLogic-0000023f”, “0?Return()”) in new stack
— Executing [dstring@macro-dial-one:4] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(DEVICES=00)”) in new stack
— Executing [dstring@macro-dial-one:5] Set(“SIP/DIDLogic-0000023f”, “LOOPCNT=1”) in new stack
— Executing [dstring@macro-dial-one:6] Set(“SIP/DIDLogic-0000023f”, “ITER=1”) in new stack
— Executing [dstring@macro-dial-one:7] Set(“SIP/DIDLogic-0000023f”, “THISDIAL=SIP/100”) in new stack
— Executing [dstring@macro-dial-one:8] GosubIf(“SIP/DIDLogic-0000023f”, “1?zap2dahdi,1()”) in new stack
— Executing [zap2dahdi@macro-dial-one:1] ExecIf(“SIP/DIDLogic-0000023f”, “0?Return()”) in new stack
— Executing [zap2dahdi@macro-dial-one:2] Set(“SIP/DIDLogic-0000023f”, “NEWDIAL=”) in new stack
— Executing [zap2dahdi@macro-dial-one:3] Set(“SIP/DIDLogic-0000023f”, “LOOPCNT2=1”) in new stack
— Executing [zap2dahdi@macro-dial-one:4] Set(“SIP/DIDLogic-0000023f”, “ITER2=1”) in new stack
— Executing [zap2dahdi@macro-dial-one:5] Set(“SIP/DIDLogic-0000023f”, “THISPART2=SIP/100”) in new stack
— Executing [zap2dahdi@macro-dial-one:6] ExecIf(“SIP/DIDLogic-0000023f”, “0?Set(THISPART2=DAHDI/100)”) in new stack
— Executing [zap2dahdi@macro-dial-one:7] Set(“SIP/DIDLogic-0000023f”, “NEWDIAL=SIP/100&”) in new stack
— Executing [zap2dahdi@macro-dial-one:8] Set(“SIP/DIDLogic-0000023f”, “ITER2=2”) in new stack
— Executing [zap2dahdi@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023f”, “0?begin2”) in new stack
— Executing [zap2dahdi@macro-dial-one:10] Set(“SIP/DIDLogic-0000023f”, “THISDIAL=SIP/100”) in new stack
— Executing [zap2dahdi@macro-dial-one:11] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [dstring@macro-dial-one:9] GotoIf(“SIP/DIDLogic-0000023f”, “1?doset”) in new stack
— Goto (macro-dial-one,dstring,13)
— Executing [dstring@macro-dial-one:13] Set(“SIP/DIDLogic-0000023f”, “DSTRING=SIP/100&”) in new stack
— Executing [dstring@macro-dial-one:14] Set(“SIP/DIDLogic-0000023f”, “ITER=2”) in new stack
— Executing [dstring@macro-dial-one:15] GotoIf(“SIP/DIDLogic-0000023f”, “0?begin”) in new stack
— Executing [dstring@macro-dial-one:16] ExecIf(“SIP/DIDLogic-0000023f”, “0?Return()”) in new stack
— Executing [dstring@macro-dial-one:17] Set(“SIP/DIDLogic-0000023f”, “DSTRING=SIP/100”) in new stack
— Executing [dstring@macro-dial-one:18] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [s@macro-dial-one:27] GotoIf(“SIP/DIDLogic-0000023f”, “0?nodial”) in new stack
— Executing [s@macro-dial-one:28] GotoIf(“SIP/DIDLogic-0000023f”, “0?skiptrace”) in new stack
— Executing [s@macro-dial-one:29] GosubIf(“SIP/DIDLogic-0000023f”, “0?ctset,1():ctclear,1()”) in new stack
— Executing [ctclear@macro-dial-one:1] NoOp(“SIP/DIDLogic-0000023f”, “Deleting: CALLTRACE/100 “) in new stack
— Executing [ctclear@macro-dial-one:2] Return(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [s@macro-dial-one:30] Set(“SIP/DIDLogic-0000023f”, “D_OPTIONS=Ttr”) in new stack
— Executing [s@macro-dial-one:31] ExecIf(“SIP/DIDLogic-0000023f”, “0?SIPAddHeader(Alert-Info: )”) in new stack
— Executing [s@macro-dial-one:32] ExecIf(“SIP/DIDLogic-0000023f”, “0?SIPAddHeader()”) in new stack
— Executing [s@macro-dial-one:33] ExecIf(“SIP/DIDLogic-0000023f”, “1?Set(CHANNEL(musicclass)=default)”) in new stack
— Executing [s@macro-dial-one:34] GosubIf(“SIP/DIDLogic-0000023f”, “0?qwait,1()”) in new stack
— Executing [s@macro-dial-one:35] Set(“SIP/DIDLogic-0000023f”, “__CWIGNORE=”) in new stack
— Executing [s@macro-dial-one:36] Set(“SIP/DIDLogic-0000023f”, “__KEEPCID=TRUE”) in new stack
— Executing [s@macro-dial-one:37] GotoIf(“SIP/DIDLogic-0000023f”, “0?usegoto,1”) in new stack
— Executing [s@macro-dial-one:38] GotoIf(“SIP/DIDLogic-0000023f”, “1?godial”) in new stack
— Goto (macro-dial-one,s,43)
— Executing [s@macro-dial-one:43] Macro(“SIP/DIDLogic-0000023f”, “dialout-one-predial-hook,”) in new stack
— Executing [s@macro-dialout-one-predial-hook:1] MacroExit(“SIP/DIDLogic-0000023f”, “”) in new stack
— Executing [s@macro-dial-one:44] Dial(“SIP/DIDLogic-0000023f”, “SIP/100,,Ttr”) in new stack
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
Audio is at 11780
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding codec 100002 (gsm) to SDP
Adding codec 100011 (g726) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 10.0.10.113:49101:
INVITE sip:100@139.0.190.24:49101;rinstance=c22f119d4cc84886;transport=UDP SIP/2.0
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK782620c3;rport
Max-Forwards: 70
From: “Anonymous” <sip:Restricted@10.0.10.83>;tag=as062ef86b
To: <sip:100@139.0.190.24:49101;rinstance=c22f119d4cc84886;transport=UDP>
Contact: <sip:Restricted@10.0.10.83:5060>
Call-ID: 4171c39c7ee908db707843040aaebc84@10.0.10.83:5060
CSeq: 102 INVITE
User-Agent: FPBX-12.0.74(11.19.0)
Date: Sun, 16 Aug 2015 22:43:18 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
P-Asserted-Identity: “Anonymous” <sip:Restricted@10.0.10.83>
Content-Type: application/sdp
Content-Length: 308

v=0
o=root 412444345 412444345 IN IP4 10.0.10.83
s=Asterisk PBX 11.19.0
c=IN IP4 10.0.10.83
t=0 0
m=audio 11780 RTP/AVP 0 8 3 111 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:3 GSM/8000
a=rtpmap:111 G726-32/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv


— Called SIP/100

<— Transmitting (NAT) to 192.170.159.194:5060 —>
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.170.159.194;branch=z9hG4bKc027.dc99fb14642b37584c92ad7c60656da4.0;received=192.170.159.194;rport=5060
Via: SIP/2.0/UDP 207.198.125.133;rport=5060;branch=z9hG4bKc027.8eaafe73ac00e89545c82ae87dc565a8.0
Via: SIP/2.0/UDP 192.170.152.170:5080;received=192.170.152.170;branch=z9hG4bK4d59a910;rport=5080
Record-Route: <sip:192.170.159.194;lr=on;ftag=as5b94fb55;vst=AAAAAAEMCQEKcQUCBx4JeQkeHwIbHwEdCzM-;nat=yes>
Record-Route: <sip:207.198.125.133;lr=on;ftag=as5b94fb55;vsf=AAAAABMLHBoLBAwBFiQhXF9ZV1xWTV0fW1tYUF9aZDo1MDgw>
From: Anonymous <sip:Restricted@207.198.125.133>;tag=as5b94fb55
To: 14159172008 <sip:14159172008@10.0.10.83>;tag=as58926234
Call-ID: 46608fc27bf8d5d32be1e8d21b82b619@192.170.152.170
CSeq: 102 INVITE
Server: FPBX-12.0.74(11.19.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Session-Expires: 1800;refresher=uas
Contact: <sip:14159172008@10.0.10.83:5060>
Content-Length: 0
<————>

<— SIP read from UDP:10.0.10.113:49101 —>
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK782620c3;rport=5060
To: <sip:100@139.0.190.24:49101;rinstance=c22f119d4cc84886;transport=UDP>
From: “Anonymous” <sip:Restricted@10.0.10.83>;tag=as062ef86b
Call-ID: 4171c39c7ee908db707843040aaebc84@10.0.10.83:5060
CSeq: 102 INVITE
Content-Length: 0

<————->
— (7 headers 0 lines) —

<— SIP read from UDP:10.0.10.113:49101 —>
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 10.0.10.83:5060;branch=z9hG4bK782620c3;rport=5060
Contact: <sip:100@139.0.190.24:49101>
To: <sip:100@139.0.190.24:49101;rinstance=c22f119d4cc84886;transport=UDP>;tag=ba6ba54c
From: “Anonymous” <sip:Restricted@10.0.10.83>;tag=as062ef86b
Call-ID: 4171c39c7ee908db707843040aaebc84@10.0.10.83:5060
CSeq: 102 INVITE
User-Agent: Z 3.7.30891 r30851
Content-Length: 0

<————->
— (9 headers 0 lines) —
list_route: hop: <sip:100@139.0.190.24:49101>
— SIP/100-00000240 is ringing

<— Transmitting (NAT) to 192.170.159.194:5060 —>
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.170.159.194;branch=z9hG4bKc027.dc99fb14642b37584c92ad7c60656da4.0;received=192.170.159.194;rport=5060
Via: SIP/2.0/UDP 207.198.125.133;rport=5060;branch=z9hG4bKc027.8eaafe73ac00e89545c82ae87dc565a8.0
Via: SIP/2.0/UDP 192.170.152.170:5080;received=192.170.152.170;branch=z9hG4bK4d59a910;rport=5080
Record-Route: <sip:192.170.159.194;lr=on;ftag=as5b94fb55;vst=AAAAAAEMCQEKcQUCBx4JeQkeHwIbHwEdCzM-;nat=yes>
Record-Route: <sip:207.198.125.133;lr=on;ftag=as5b94fb55;vsf=AAAAABMLHBoLBAwBFiQhXF9ZV1xWTV0fW1tYUF9aZDo1MDgw>
From: Anonymous <sip:Restricted@207.198.125.133>;tag=as5b94fb55
To: 14159172008 <sip:14159172008@10.0.10.83>;tag=as58926234
Call-ID: 46608fc27bf8d5d32be1e8d21b82b619@192.170.152.170
CSeq: 102 INVITE
Server: FPBX-12.0.74(11.19.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Session-Expires: 1800;refresher=uas
Contact: <sip:14159172008@10.0.10.83:5060>
Content-Length: 0
This Hoiio debug
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
— Executing [s@from-trunk:1] NoOp(“SIP/85258010007-0000021d”, “No DID or CID Match”) in new stack
— Executing [s@from-trunk:2] Answer(“SIP/85258010007-0000021d”, “”) in new stack
— Executing [s@from-trunk:3] Log(“SIP/85258010007-0000021d”, “WARNING,Friendly Scanner from 54.251.255.196”) in new stack
[2015-08-17 05:34:06] WARNING[19496][C-0000022a]: Ext. s:3 @ from-trunk: Friendly Scanner from 54.251.255.196
— Executing [s@from-trunk:4] Wait(“SIP/85258010007-0000021d”, “2”) in new stack
> 0x7fc6380baa10 — Probation passed – setting RTP source address to 54.251.255.198:14276
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
— Executing [01017972598031097@from-sip-external:1] NoOp(“SIP/139.0.190.24-0000021e”, “Received incoming SIP connection from unknown peer to 01017972598031097”) in new stack
— Executing [01017972598031097@from-sip-external:2] Set(“SIP/139.0.190.24-0000021e”, “DID=01017972598031097”) in new stack
— Executing [01017972598031097@from-sip-external:3] Goto(“SIP/139.0.190.24-0000021e”, “s,1”) in new stack
— Goto (from-sip-external,s,1)
— Executing [s@from-sip-external:1] GotoIf(“SIP/139.0.190.24-0000021e”, “0?checklang:noanonymous”) in new stack
— Goto (from-sip-external,s,5)
— Executing [s@from-sip-external:5] Set(“SIP/139.0.190.24-0000021e”, “TIMEOUT(absolute)=15”) in new stack
— Channel will hangup at 2015-08-17 05:34:22.931 WIB.
— Executing [s@from-sip-external:6] Log(“SIP/139.0.190.24-0000021e”, “WARNING,”Rejecting unknown SIP connection from 142.54.189.154″”) in new stack
[2015-08-17 05:34:07] WARNING[19497][C-0000022b]: Ext. s:6 @ from-sip-external: “Rejecting unknown SIP connection from 142.54.189.154”
— Executing [s@from-sip-external:7] Answer(“SIP/139.0.190.24-0000021e”, “”) in new stack
== Spawn extension (from-sip-external, s, 7) exited non-zero on ‘SIP/139.0.190.24-0000021e’
— Executing [h@from-sip-external:1] Hangup(“SIP/139.0.190.24-0000021e”, “”) in new stack
== Spawn extension (from-sip-external, h, 1) exited non-zero on ‘SIP/139.0.190.24-0000021e’
— Executing [s@from-trunk:5] Playback(“SIP/85258010007-0000021d”, “ss-noservice”) in new stack
— <SIP/85258010007-0000021d> Playing ‘ss-noservice.ulaw’ (language ‘en’)
== Spawn extension (from-trunk, s, 5) exited non-zero on ‘SIP/85258010007-0000021d’
— Executing [h@from-trunk:1] Macro(“SIP/85258010007-0000021d”, “hangupcall,”) in new stack
— Executing [s@macro-hangupcall:1] ExecIf(“SIP/85258010007-0000021d”, “0?Set(CDR(recordingfile)=.)”) in new stack
— Executing [s@macro-hangupcall:2] GotoIf(“SIP/85258010007-0000021d”, “1?theend”) in new stack
— Goto (macro-hangupcall,s,4)
— Executing [s@macro-hangupcall:4] Hangup(“SIP/85258010007-0000021d”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 4) exited non-zero on ‘SIP/85258010007-0000021d’ in macro ‘hangupcall’
== Spawn extension (from-trunk, h, 1) exited non-zero on ‘SIP/85258010007-0000021d’

CLI> sip set debug on
<————->
— (14 headers 0 lines) —
Really destroying SIP dialog ’78a185490ccc392531fed3a714d5220a@10.0.10.83:5060′ Method: OPTIONS
Really destroying SIP dialog ‘fe5f2d484f721552ea893aed07680a67’ Method: BYE

<— SIP read from UDP:142.54.189.154:5084 —>
INVITE sip:901017972592195434@139.0.190.24 SIP/2.0
To: 901017972592195434<sip:901017972592195434@139.0.190.24>
From: 1013<sip:1013@139.0.190.24>;tag=c22d4e94
Via: SIP/2.0/UDP 142.54.189.154:5084;branch=z9hG4bK-2d20f30ad098e6489e808aa02f74cdf2;rport
Call-ID: 2d20f30ad098e6489e808aa02f74cdf2
CSeq: 1 INVITE
Contact: <sip:1013@142.54.189.154:5084>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, BYE
User-Agent: sipcli/v1.8
Content-Type: application/sdp
Content-Length: 284

v=0
o=sipcli-Session 607366599 1446372477 IN IP4 142.54.189.154
s=sipcli
c=IN IP4 142.54.189.154
t=0 0
m=audio 5087 RTP/AVP 18 0 8 101
a=fmtp:101 0-15
a=rtpmap:18 G729/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=ptime:20
a=sendrecv
<————->
— (12 headers 13 lines) —
Sending to 142.54.189.154:5084 (NAT)
Sending to 142.54.189.154:5084 (NAT)
Using INVITE request as basis request – 2d20f30ad098e6489e808aa02f74cdf2
No matching peer for ‘1013’ from ‘142.54.189.154:5084’
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
Found RTP audio format 18
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Found audio description format G729 for ID 18
Found audio description format PCMU for ID 0
Found audio description format PCMA for ID 8
Found audio description format telephone-event for ID 101
Capabilities: us – (gsm|ulaw|alaw|g726), peer – audio=(ulaw|alaw|g729)/video=(nothing)/text=(nothing), combined – (ulaw|alaw)
Non-codec capabilities (dtmf): us – 0x1 (telephone-event|), peer – 0x1 (telephone-event|), combined – 0x1 (telephone-event|)
Peer audio RTP is at port 142.54.189.154:5087
Looking for 901017972592195434 in from-sip-external (domain 139.0.190.24)
list_route: hop: <sip:1013@142.54.189.154:5084>
<— Transmitting (NAT) to 142.54.189.154:5084 —>
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 142.54.189.154:5084;branch=z9hG4bK-2d20f30ad098e6489e808aa02f74cdf2;received=142.54.189.154;rport=5084
From: 1013<sip:1013@139.0.190.24>;tag=c22d4e94
To: 901017972592195434<sip:901017972592195434@139.0.190.24>
Call-ID: 2d20f30ad098e6489e808aa02f74cdf2
CSeq: 1 INVITE
Server: FPBX-12.0.74(11.19.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Contact: <sip:901017972592195434@10.0.10.83:5060>
Content-Length: 0
<————>
— Executing [901017972592195434@from-sip-external:1] NoOp(“SIP/139.0.190.24-0000022c”, “Received incoming SIP connection from unknown peer to 901017972592195434”) in new stack
— Executing [901017972592195434@from-sip-external:2] Set(“SIP/139.0.190.24-0000022c”, “DID=901017972592195434”) in new stack
— Executing [901017972592195434@from-sip-external:3] Goto(“SIP/139.0.190.24-0000022c”, “s,1”) in new stack
— Goto (from-sip-external,s,1)
— Executing [s@from-sip-external:1] GotoIf(“SIP/139.0.190.24-0000022c”, “0?checklang:noanonymous”) in new stack
— Goto (from-sip-external,s,5)
— Executing [s@from-sip-external:5] Set(“SIP/139.0.190.24-0000022c”, “TIMEOUT(absolute)=15”) in new stack
— Channel will hangup at 2015-08-17 05:38:07.186 WIB.
— Executing [s@from-sip-external:6] Log(“SIP/139.0.190.24-0000022c”, “WARNING,”Rejecting unknown SIP connection from 142.54.189.154″”) in new stack
[2015-08-17 05:37:52] WARNING[19633][C-00000239]: Ext. s:6 @ from-sip-external: “Rejecting unknown SIP connection from 142.54.189.154”
— Executing [s@from-sip-external:7] Answer(“SIP/139.0.190.24-0000022c”, “”) in new stack
Audio is at 19110
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP

<— Reliably Transmitting (NAT) to 142.54.189.154:5084 —>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 142.54.189.154:5084;branch=z9hG4bK-2d20f30ad098e6489e808aa02f74cdf2;received=142.54.189.154;rport=5084
From: 1013<sip:1013@139.0.190.24>;tag=c22d4e94
To: 901017972592195434<sip:901017972592195434@139.0.190.24>;tag=as4647be9f
Call-ID: 2d20f30ad098e6489e808aa02f74cdf2
CSeq: 1 INVITE
Server: FPBX-12.0.74(11.19.0)
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
Supported: replaces, timer
Contact: <sip:901017972592195434@10.0.10.83:5060>
Content-Type: application/sdp
Content-Length: 256

v=0
o=root 2139276905 2139276905 IN IP4 10.0.10.83
s=Asterisk PBX 11.19.0
c=IN IP4 10.0.10.83
t=0 0
m=audio 19110 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s